Pariser Industries 91 Michigan Ave. Paterson, New Jersey 07503
SPIN DOCTOR
Technical Bulletin
Customer Testimonials:
“I have experienced on again- off again lint problems for the past year. My spin discs were so badly clogged that they would not even drain. I would spin weekly but the filter pressure would not decrease. After running Pariser’s Spin Dr. through my system, I not only lowered my filter pressure, improved my solvent quality, but I have eliminated my year long lint headache.”
John Mr. Dominic’s Cleaners La Grangeville, N.Y.
“We have been spinning our disc filters on a regular basis but our filter pressure would always climb back up to 20-30 pounds after only several loads. After using the Pariser Spin Doctor our filter pressure has gone down and stayed down, and our solvent looks much cleaner. Our spotting is down and our clothes are coming out cleaner. This stuff really works!”
Marilyn Esposito Emerald Cleaners Parsippany, NJ
Note: See our new ad below
SPIN DOCTOR™
(Spin Disc Filter Cleaner)
PRODUCT DESCRIPTION:
Spin Doctor represents a breakthrough in spin disc filtration system maintenance. The product contains a unique blend of surfactants and anti-static agents with the ability to free and remove lint and particulate matter from spin discs far more effectively than through the standard spinning processes.
APPLICATION:
Spin Doctor will extend the life of filter discs and maintain lower filter pressure thereby enabling Dry Cleaners to obtain superior cleaning results. Additionally, by maintaining lower filter pressure, operators will greatly increase the life of filters and system solvent pumps.
Product can be used for heavy duty cleaning of spin filters and housings, and is recommended
for general routine spin disc filter maintenance.
Directions: Refer to your owner’s manual for the correct manual operation button icons. Manual step directions are indicated in red.
1. Make sure that the still is cooked out and empty.
2. Add recommended dose of SPIN DOCTOR ™ directly to the wash wheel, (32-64 oz. depending on the size and condition of the spin filters). Note: If using a hydrocarbon system, you have the option of adding 16 oz. of “Taskmaster” along with the Spin Doctor to increase effectiveness.
3. Activate manual mode.
4. Transfer 10 gallons of clean solvent from the tank (usually tank 3) to the wheel, (Activate: Rinse tank out, Wheel in, Pump on, Wheel turning).
5. Circulate clean solvent on filter bypass, (not through the spin disc), with the wash wheel turning, (Activate: Wheel in, Wheel out, Pump on, Wheel turning).
6. Go to high extract for 15 seconds, (Activate: Wheel in, Wheel out, Pump on, Extract on), then stop.
7. Spin the disc filter for 2 minutes, (Activate: Filter spin on).
8. Drain the disc to still while spinning, (Activate: Filter spin on, Filter on, Still in). Observe w/ flashlight until draining is complete.
9. Stop
10. Pump cleaning mixture from the wheel to the spin disc, (Activate: Wheel out, Wheel in, Filter on, Pump on, Wheel turning).
11. Again, drain the filter to the still while spinning, (Activate: Filter spin on, Filter on, Still in). Observe w/ flashlight until draining is complete. Stop.
12. Refill the filters manually from the tank of your choice until you begin to see a pressure reading on your filter pressure gauge. (Activate Tank out, Tank in, Filter on).
13. Clean out your button trap of any lint.
14. You are now ready to resume cleaning. You will observe decreased filter pressure, increased solvent flow and increased solvent clarity in your sight glass.
To maintain optimum on-going spin disc filter performance, this procedure should be incorporated into the monthly dry cleaning machine maintenance program.
PACKAGING
Spin Doctor is packaged in 1/2 gallon containers, 4 to a case.
